Eriri TPV echebe | TC/FEP/TCWB/TPV 2x1.50mm² -40~+120℃
Eriri TPV CHEELD: Arụmọrụ siri ike maka gburugburu ụlọ ọrụ na-achọsi ike
Nke anyịEriri TPV echebena-enye ike na nnyefe mgbaàmà a pụrụ ịdabere na ya n'ebe ọrụ siri ike nke chọrọ ma ntachi obi okpomọkụ na nchekwa elektrọnik.Ndị na-eduzi ọla kọpa 2x1.50mm² nke a kpụkọrọ akpụkọnaNjikọ 19/0.32, nke echekwara site naMkpuchi FEP (ojii/uhie), ihe mkpuchi TCWB zuru oke (Tanned Copper Waya Braiding)naMkpuchi ≥80%, na ihe na-adịgide adịgideIhe mkpuchi mpụta TPVA na-enye ọkwa maka ọrụ site na-40℃ ruo +120℃naVoltaji nnwale 2000V/min, nke aEriri OD nke 6.4mmna-enye ngwọta kacha mma makaakpaaka ụlọ ọrụ mmepụta ihe, akụrụngwa dị n'èzí, na ngwaa na-ekpughere ya na mgbanwe okpomọkụ, kemịkalụ, na nnyonye anya eletrọnịkị.
Isi ihe na uru teknụzụ
✔Oke Okpomọkụ obosara-ihe mkpuchi TPVna-ejigide mgbanwe na arụmọrụ site na-40℃ ruo +120℃
✔Nchedo EMI dị irè-TCWB na-eme ka mkpuchi ya dịkwuo elu, nke nwere mkpuchi ≥80%.na-enye nchebe siri ike megide nnyonye anya electromagnetic
✔Ogologo Oge Emelitere-Ihe TPVna-enye ezigbo iguzogide mmanụ, kemịkalụ, radieshon UV, na ihu igwe
✔Mkpuchi a pụrụ ịtụkwasị obi-Mkpuchi FEPna-eme ka ihe onwunwe eletriki kwụsiri ike n'ofe oke okpomọkụ dị iche iche
✔Nkwa Nchekwa-Voltaji nnwale 2000V/minna-enyocha iguzosi ike n'ezi ihe mkpuchi siri ike
Nkọwapụta na Iwuli
| Paramita | Nkọwapụta |
|---|---|
| Nhazi | 2x1.50mm² |
| Onye na-eduzi ihe | TC (Ọla kọpa a kpụchara akpụ, 19/0.32) |
| Mkpuchi | FEP (Ethylene Propylene nke a na-agbaze agbaze) - Ojii, Uhie |
| Dayameta waya | 2.25mm (onye na-eduzi ihe mkpuchi nkeonwe) |
| Ịchekwa | TCWB (Nkwụnye waya ọla kọpa a kpara akpa, mkpuchi ≥80%) |
| Ọkpọ | TPV (Thermoplastic Vulcanizate) |
| Dayameta N'ozuzu | 6.4mm |
| Ọkwa Okpomọkụ | -40℃ ruo +120℃ |
| Voltaji ule | 2000V/min |
Gịnị mere anyị ji họrọ eriri TPV CHEELDED ANYỊ?
Anyị bụ ọkachamara n'ịmepụta waya maka ngwa ụlọ ọrụ ebe iguzogide gburugburu ebe obibi dị mkpa dịka arụmọrụ eletriki. Eriri TPV anyị nke nwere ihe mkpuchi na-ejikọta ihe onwunwe dielectric dị mma nke mkpuchi FEP na ogologo ndụ gburugburu ebe obibi nke mkpuchi TPV, na-emepụta ihe ngwọta nke na-arụ ọrụ nke ọma ma n'ime ụlọ ọrụ mmepụta ihe dị n'èzí ma n'èzí. Ịkpa ọla kọpa a kpara akpa na-enye nchebe EMI dị irè na-enweghị mgbanwe, ebe 19/0.32 conductor stranding na-enye nguzozi kachasị mma n'etiti ikike ugbu a na ịgbagọ agbagọ. Site na ahụmịhe dị ukwuu na akpaaka ụlọ ọrụ mmepụta ihe na ngwa gburugburu ebe obibi siri ike, anyị na-enye ngwọta ndị na-ebelata mmezi ma melite ntụkwasị obi sistemụ.
Ngwa ndị a na-ahụkarị
•Mmepụta akpaaka ụlọ ọrụ mmepụta ihe- Sistemụ njikwa moto, waya sensọ, na sistemụ akpaaka ụlọ ọrụ mmepụta ihe
•Ngwa dị n'èzí- Igwe na ngwaọrụ ndị e kpughere n'ọnọdụ ihu igwe na oke okpomọkụ
•Sistemụ Njem- Waya ụgbọala, njikwa ụgbọ okporo ígwè, na akụrụngwa mkpanaka
•Ike Mmegharị Ọhụrụ- Njikwa sistemụ ike anyanwụ na ifufe nke ekpughere ihe ndị metụtara gburugburu ebe obibi
•Njikwa Usoro- Ụlọ ọrụ mmepụta ihe nwere mkpughe kemịkalụ ma ọ bụ mgbanwe okpomọkụ dị ukwuu
- Rịọ maka ihe nlele na data nrubeisi - Nwalee eriri TPV anyị na ngwa gị
-
Budata Nkọwapụta Nkà na ụzụ - Nweta data arụmọrụ zuru oke
-
Kpọtụrụ Ndị otu Injinia Anyị - Kwurịta ihe gbasara gburugburu ebe obibi gị
-
Nweta nhota asọmpi - Ngwọta OEM/ODM dị
Ajụjụ Ndị A Na-ajụkarị
Q1: Kedu uru TPV bara karịa mkpuchi PVC ma ọ bụ PUR ọdịnala?
A:TPV na-enye oke okpomọkụ dị elu (-40℃ ruo +120℃), ezigbo iguzogide ihu igwe, ezigbo iguzogide kemịkalụ na-enweghị nsogbu mbugharị plastik nke PVC, yana iguzogide hydrolysis ka mma karịa ọtụtụ usoro PUR.
Q2: Kedu ka mkpuchi ≥80% nke ịkpa ákwà si tụnyere nhọrọ nchekwa ndị ọzọ?
A:Ịkpado ≥80% na-enye ezigbo nchekwa dị mma ma dị mma(nke na-abụkarị mbelata 70-85dB), zuru oke maka ọtụtụ ngwa ụlọ ọrụ mmepụta ihe. Mkpuchi dị elu (90-95%) dị maka gburugburu ebe mkpọtụ dị oke egwu.
Q3: Waya a ọ ga-enwe ike iguzogide mkpughe na-aga n'ihu n'èzí?
A: Ee, ọ bụ eziokwuIhe mkpuchi TPV na-enye ezigbo iguzogide UV na ihu igwe, na-eme ka ọ dị mma maka iji ya eme ihe n'èzí mgbe niile na-enweghị nchebe ọkpọkọ ọzọ n'ọtụtụ ebe.
Q4: Kedu ọkwa dị ugbu a enwere ike ịtụ anya ya na oke okpomọkụ kachasị elu?
A: Ọkwa ugbu a na-ebelata ka okpomọkụ na-arị elu. Na 120℃,Nkwụsị bụkarị 60-70% nke ike okpomọkụ ụlọE nwere usoro nhazi kpọmkwem maka atụmatụ ngwa.
Q5: Enwere nhọrọ agba omenala maka mkpuchi TPV?
A: Ee, anyị na-enyeagba dị iche iche nke mkpuchi TPVgụnyere agba ojii, isi awọ, oroma, na agba ndị ọzọ a na-ahụkarị maka njirimara sekit ma ọ bụ ihe achọrọ maka koodu nchekwa.