PEEK Cable ea Coaxial ea Mocheso o Phahameng | 1.5mm² TC/PEEK/TCWB/PEEK

KHEBELE EA COAXIAL EA MOCHESO O PHAHAMENG: TŠEBELETSO E PHETHAHETSENG BAKENG SA LITIKOLOHO TSE FETILENG

Ea ronaCable ea Coaxial ea Mocheso o Phahameng ea PEEKe entsoe bakeng sa phetiso ea bohlokoa ea lets'oao libakeng tse hlokang mocheso o matla le tse mabifi ka lik'hemik'hale. Thapo ena ea coaxial ea boleng bo holimo e na leMokhanni oa koporo o entsoeng ka makotikoti oa 1.5mm²le19/0.16 ho khomaretsa khoele e tšesaane, e sirelelitsoeng ke ts'ebetso e phahamengHo thibela ho kenella ha PEEK (Polyetheretherketone), e matlaThebe ea TCWB (Tinned Copper Wire Loiding)le e tšoarellangSHEBA selateng se ka ntleKa ho nepahalaBophara ba ho kwahela ha 2.3mmleBophara ba kakaretso ba 3.4mm, thapo ena e fana ka ts'ebetso e ikhethang ea RF, matla a mechini, le ts'ebetso e tsoelang pele mochesong moo lithapo tsa coaxial tse tloaelehileng li ka hlolehang.

LITŠOBOTSI TSA BOHLOKOA LE MELEMO EA TEKHNIKE

✔Botsitso bo ikhethang ba Thermal-Kaho ea PEEKe mamella ts'ebetso e tsoelang pele ea mocheso o phahameng (hangata ho fihlela ho250℃) ha e ntse e boloka thepa e tsitsitseng ea motlakase le ea mechini
✔Khanyetso e Phahameng ea Lik'hemik'hale-SHEBA thepae batla e sa sebetse hantle ho oli, mafura, li-acid, li-solvent le lik'hemik'hale tse matla tsa indasteri
✔Tshebetso e nepahetseng ea RF- Thepa e tsitsitseng ea dielectric e netefatsa impedance e tsitsitseng le tahlehelo e fokolang ea lets'oao maqhubung a phahameng
✔Tšireletso e Matla ea Mekaniki-Ho loha ha TCWB (16x3x0.12)e fana ka katleho e ntle ea tšireletso le ho tšoarella ha mechini
✔Khanyetso ea Mollo ea Tlhaho-PEEK ka tlhaho e thibela malakabeka mosi o tlase le khase e chefo e ntšitsoeng, e fihlelang litlhoko tse thata tsa polokeho

LITLHAKISO LE KAHO

KE HOBANENG HA RE KHETHA KHEBELE EA RONA EA COAXIAL EA PEEK?

Re ikhethile ka ho etsa likhoele bakeng sa lits'ebetso moo thepa e tloaelehileng e ke keng ea phela. Thapo ea rona ea coaxial ea PEEK e emela kopano ea ts'ebetso ea maqhubu a phahameng le ho tšoarella ho feteletseng tikolohong. Ho fapana le likhoele tsa coaxial tsa PTFE kapa FEP, PEEK e fana ka matla a mechini a betere haholo, khanyetso ea ho seha, le khanyetso ea ho khohlela ha e ntse e boloka ts'ebetso e ntle ea mocheso o phahameng le ea lik'hemik'hale. Ho khomaretsa ha conductor ea 19/0.16 ho fana ka ho tenyetseha ho hoholo ntle le ho tela conductivity, ha insulation ea PEEK e entsoeng ka nepo e netefatsa litšobotsi tse tsitsitseng tsa motlakase. Ka boiphihlelo bo bongata lits'ebetsong tsa lifofane, indasteri le saense, re fana ka litharollo tse nolofalletsang phetiso e tšepahalang ea lets'oao maemong a ka senyang likhoele tse tloaelehileng tsa coaxial.

LITŠEBELETSO TSE TLWAELEHILENG

•Lifofane le Lifofane- Li-Avionics, li-sensor tsa ho lekola enjene, le litsamaiso tsa lifofane tse nang le mocheso o phahameng
•Taolo ea Ts'ebetso ea Indasteri- Lithapo tsa sensor tsa mocheso o phahameng ka har'a lionto, li-reactor le lisebelisoa tsa ho sebetsana le mocheso
•Sesole le Tšireletso- Mecha ea puisano e thata, litsamaiso tsa radar, le lisebelisoa tsa elektroniki tsa likoloi tsa sesole
•Oli le Khase- Lisebelisoa tsa ho kenya ka tlas'a mokoti, tlhokomelo ea fektheri ea ho hloekisa, le lits'ebetso tsa petrochemical tsa mocheso o phahameng
•Patlisiso ea Saense- Lisebelisoa tsa teko ea mocheso o phahameng, lisebelisoa tsa kamore ea vacuum, le lisebelisoa tsa lipatlisiso

• Kopa Lintlha tsa Mohlala le tsa ho Latela Melao - Lekola cable ts'ebelisong ea hau

• Khoasolla Litlhaloso tsa Tekheniki - Fumana lintlha tse felletseng tsa ts'ebetso ea motlakase

• Ikopanye le Sehlopha sa Rona sa Boenjiniere - Buisana ka litlhoko tsa hau tsa ho kenya lithapo tsa elektroniki

• Fumana Khoteshene ea Tlholisano - Litharollo tsa OEM/ODM lia fumaneha

LBH

P1: Ke eng e etsang hore PEEK e be betere ho feta PTFE bakeng sa ho kenya thapo ya coaxial?
K: Leha ka bobedi di fana ka tshebetso e babatsehang mochesong o phahameng,PEEK e fana ka matla a mechini a betere haholo, ho hanyetsa ho seha le ho hanyetsa ho kgohlopa.ho feta PTFE, e leng se etsang hore e be ntle bakeng sa lits'ebetso moo likhoele li nang le khatello ea 'mele kapa li hlokang ho boloka litekanyo tse nepahetseng tlas'a mojaro.

P2: Ke dikgetho dife tsa impedance tse fumanehang?
A: Hangata re etsa maemo a tloaelehilengMefuta ea 50Ω le 75Ω, ka di-impedances tse ikgethileng (tse kang 93Ω) tse fumanehang ha ho kopuwa. Ho mamella di-impedances hangata ho bolokwa kahare ho ±2Ω bakeng sa ditshebediso tse nepahetseng.

P3: Sebopeho sa TCWB shielding (16x3x0.12) se sebetsa jwang?
A: Senapaterone e ntlafalitsoeng ea ho loha e fana ka ho tenyetseha ho hoholo ha e ntse e boloka katleho e phahameng ea tšireletso(hangata e ka ba >90dB ho 1GHz), ka dithapo tse ngata tse nyane tse etsang thebe e teteaneng, e tshwanang e bolokang botsitso ho sa tsotelehe ho kobeha le ho kobeha.

P4: Na thapo ena e ka mamella ho sterilization e pheta-phetoang ea autoclave?
A: Ehlile.PEEK e hanela haholo ho bola ha mouoanemme e boloka thepa ea eona ka lipotoloho tse pheta-phetoang tsa autoclave, e leng se etsang hore thapo ena e lokele lisebelisoa tsa bongaka le tsa laboratori tse hlokang ho hloekisoa.

P5: Tshebetso ya maqhubu a maqhubu ke efe?
K: Ho latela kaho le bolelele bo nepahetseng, thapo ena ya coaxial ya PEEK hangata e sebetsa hantleho fihlela ho 6-8 GHz, ka ho fokotseha ho tlase le litšobotsi tsa mohato tse tsitsitseng ho feta likhoele tse tloaelehileng tsa mofuta oa RG mochesong o phahameng.