PEEK Cable e Sirelelitsoeng ea Mocheso o Phahameng oa PEEK | 4x20AWG SPC/PEEK/SCR/PEEK 300℃ 500V
KHEBELE EA MOCHESO O PHAHAMILENG OA PEEK MULTI-CORE: E ENTSETSOE BAKENG SA MOETSO O FETILENG
Ea ronaCable ea Mocheso o Phahameng oa PEEK Multi-Coree entsoe ho fana ka ts'ebetso e sa bapisoeng le e 'ngoe tikolohong e hlokang mocheso o mongata le e mabifi ka lik'hemik'hale Lefatšeng le libakeng tse ling. Cable ena e tsoetseng pele e na le likarolo tse fapaneng.Li-conductor tsa koporo e entsoeng ka silevera (SPC) tsa 4x20AWGle19/0.18 ho khomaretsa khoele e tšesaane, e 'ngoe le e 'ngoe e koahetsoeng ka mocheso le e sirelelitsoeng ka mekhahlelo e mengata eaPEEK (Polyetheretherketone), thermoplastic ea boleng bo holimo ea semi-crystalline. E koahetsoe keThebe ea ho loha terata ea SPC (sekoahelo sa ≥85%)le kakaretsoSekoahelo sa PEEK, e lekantsoe bakeng sa500Vle ts'ebetso e tsoelang pele ho fihlela ho300℃(e lekoa ho320℃ ka lihora tse 8Ke tharollo e tobileng bakeng salisebelisoa tsa sefofane, lisebelisoa tsa ho bulela mokoti o ka tlase, ho tsamaisa lintho ka mokhoa o tsoetseng pele, le ts'ebetso ea lik'hemik'halemoo ho hloleha e seng khetho.
LITŠOBOTSI TSA BOHLOKOA LE MELEMO EA TEKHNIKE
✔Botsitso bo Felletseng ba Thermal le Lik'hemik'hale:Kaho ea PEEKe boloka botšepehi ba mechini le matla a dielectric ho tloha mochesong oa cryogenic ho ea ho o tsoelang pele300℃, ka ho hanyetsa ka mokhoa o ikhethang hydrolysis, li-acid, li-base le maro a hydrocarbon.
✔Tšireletso e Phahameng ea EMI le Botšepehi ba Matšoao:Thebe ea terata ea SPC (≥85%)e fana ka tšireletso e matla khahlanong le tšitiso ea motlakase, ha dielectric ea PEEK e nang le tahlehelo e tlase e netefatsa phetiso e hloekileng ea lets'oao bakeng sa lisebelisoa tse bonolo.
✔Ho Tšoarella ha Mechini ho Ikhethang: PEEK e fana ka khanyetso e ikhethang ea ho khohlela, ts'ebetso e ntle ea ho khaola le ho bolokaho tenyetseha ho hoholoesita le ka mora ho pepesehela mocheso o feteletseng nako e telele, ho feta PTFE kapa FEP ditshebedisong tse fetohang.
✔Sebaka le Boima bo Ntlafalitsoe: E nyaneOD ea 4.5mme nolofalletsa ho kenya terata e nang le bongata bo boholo libakeng tse koetsoeng, tse kang libaka tsa enjene ea lifofane kapa likhoele tsa lisebelisoa tse theohelang ka tlase, ntle le ho beha tšebetso kotsing.
✔Netefatso ea Boleng bo TiilengSehlopha se seng le se seng sa cable se kenngoa tlas'aTeko ea 1.5kV/min ea hi-potleTeko ea mamello ea mocheso ea 320℃/lihora tse 8, ho netefatsa botshepehi tlasa kgatello e matla ya tshebetso.
LITLHAKISO LE KAHO
| Paramethara | Tlhaloso |
|---|---|
| Tlhophiso | 4x20AWG |
| Motsamaisi | Koporo e Tletseng Silevera (SPC), 19/0.18 thapo e kgwelehang, Ø 0.9mm |
| Ho kenya mocheso | PEEK (Polyetheretherketone), Ø 1.4mm (terata e kentsweng mochesong) |
| Tšireletso | Skrine ea ho roka terata ea SPC (SCR), ≥85% ea ts'ireletso |
| Selateng | PEEK (Polyetheretherketone) |
| Bophara ba Kakaretso (OD) | 4.5mm |
| Tekanyetso ea Motlakase | 500V |
| Mocheso o Tsoelang Pele | Ho fihlela ho300℃ |
| Teko ea Motlakase | 1.5kV/motsotso |
| Teko ea Mocheso o Phahameng | 320℃ ka lihora tse 8 |
KE HOBANENG HA RE KHETHA KHEBELE EA RONA EA MOCHESO O PHAHAMILENG OA PEEK?
Re ikhethile ka ho etsa likhoele bakeng sa lits'ebetso tsa meeli moo meeli ea mahlale a thepa e sutumelletsoang letsatsi le letsatsi. PEEK ha se sesebelisoa sa ho thibela mocheso feela; ke sesebelisoa se thusang ts'ebetso se khethiloeng ho feta PTFE kapa likhetho tsa letsopa bakeng sa motsoako oa eona o ikhethang oabonolo ba ho sebetsana le tsona, matla a ikhethang a mechini, le ho se sebetse hantle ha lik'hemik'hale ka ho fetisisa. Thekoporo e koahetsoeng ka sileveradi-conductor le thebe di netefatsa tshebetso e ntle maemong a maqhubu a phahameng le a senyang. Thapo ena ke sephetho sa tshebedisano e tebileng ya boenjiniere le diindasteri tse sebetsang moeding wa monyetla wa mocheso, tse fanang ka tharollo e fokotsang ho rarahana ha sistimi le ho eketsa ts'epo ya thomo.
LITŠEBELETSO TSE TLWAELEHILENG
-
Sefofane le ho Tsamaisa Jete: Ho kenya lithapo kahareli-nacelles tsa enjene ea jete, li-unit tsa motlakase tse thusang (li-APU), le lisebelisoa tsa likoloi tse kenang hape.
-
Lisebelisoa tsa ho theola mokoti oa oli le khase:Ho rema lifate ha ho ntse ho chekoa (LWD), ho lekanya ha ho ntse ho chekoa (MWD), le dikhoele tsa sensor tse sa feleng didibeng tse nang le kgatello e phahameng le mocheso o phahameng (HPHT).
-
Indasteri ea Lik'hemik'hale le Mekhoa: Likhoele tsa sensor le hitara kahareli-reactor, li-autoclave le liphaepheho sebetsana le lik'hemik'hale tse matla.
-
Sesole le Tšireletso:Litsamaiso tsa tataiso ea limisaele, lisebelisoa tsa elektroniki tsa likoloi tse hlometseng, le liforomo tse ling tse pepesehetseng mocheso o feteletseng le maemo a ho phatloha.
-
Tlhahiso e Tsoetseng Pele: Ho kenya lithapo bakeng saLiprinta tsa 3D tse nang le mocheso o phahameng, lisebelisoa tsa tlhahiso ea semiconductor, le dionto tsa vacuum.
- Kopa Lintlha tsa Mohlala le tsa ho Latela Melao - Lekola thapo mme o hlahlobe data ya rona ya teko ya mocheso ya 320℃/8hr.
-
Khoasolla Litlhaloso tsa Tekheniki - Fumana litlhaloso tse qaqileng mabapi le ho hanyetsa lik'hemik'hale le botsofali ba mocheso.
-
Ikopanye le Sehlopha sa Rona sa Boenjiniere - Buisana ka liphephetso tsa hau tse ikhethang tsa mocheso, lik'hemik'hale le mechini.
-
Fumana Khoteshene ea Tlholisano - Litharollo tsa OEM/ODM lia fumaneha
LBH
P1: Ke eng e etsang hore PEEK e be betere ho feta PTFE kapa FEP bakeng sa lits'ebetso tsa mocheso o phahameng?
A:Leha PTFE le FEP li na le litekanyetso tse ntle tsa mocheso,PEEK e fana ka matla a phahameng haholo a mechini, ho hanyetsa ho kgohlopa, le ho hanyetsa ho kgaola mochesong o phahameng.Ha e phalle ka serame tlas'a khatello joalo ka PTFE 'me e boloka sebopeho le thepa ea eona hamolemo libakeng tse fetohang, tse nang le khatello e phahameng.
P2: Ke hobane'ng ha ho sebelisoa silivera plating ho mokhanni le thebe?
A: Ho betla ka silevera ho fana ka motlakase o phahameng ka ho fetisisa le ho hanyetsa mafome/oxidation ka tsela e phahameng maemong a mocheso o feteletseng.ha ho bapisoa le thini kapa nikeli. Sena se bohlokoa bakeng sa ho boloka botšepehi ba lets'oao le katleho ea tšireletso libakeng tse thata, tse nang le mocheso o phahameng ka nako e telele.
P3: Na thapo ena e ka mamella potoloho ea mocheso le ho thothomela?
A:Ka 'nete.PEEK e na le khanyetso e ntle khahlanong le mokhathala o chesang le ho thekesela ha eona, e leng se etsang hore e be ntle bakeng sa lits'ebetso tse nang le liphetoho tse potlakileng tsa mocheso. Ha e kopantsoe le li-conductor tse nang le likhoele tse tšesaane, thapo e etselitsoe ho mamella ho thothomela ho hoholo, ke ka lebaka leo e boletsoeng bakeng sa lisebelisoa tsa lifofane le tsa ho theola moea.
P4: Na thapo e loketse ho sebediswa dibakeng tse se nang mokelikeli kapa tse nang le mahlasedi?
A:E.PEEK e na le thepa e tlase haholo ea ho ntša khase, e leng se etsang hore e lokele likamore tsa vacuum le lits'ebetso tsa sebaka. E boetse e bonts'akhanyetso e ntle khahlanong le mahlaseli a gamma, e sebetsa hantle ho feta di-polymer tse ding tse ngata dibakeng tsa nyutlelie kapa tsa sepakapaka.
P5: Na o ka iketsetsa thebe kapa wa eketsa dithebe tse pedi ka nngwe?
A:Ka sebele. Re ka etsa boenjiniere ba thapo ena kadibopeho tse fapaneng tsa tshireletso, ho kenyeletsoa le tšireletso ea para e le 'ngoe (foil kapa braid) ka har'a kaho eohle, e etselitsoeng litlhoko tsa hau tse ikhethileng tsa EMI/RFI.