Menene Kebul Mai Tsaron Cikin Gida?
- Gabatarwa: Menene Kebul Mai Tsaron Cikin Gida?
Ankebul mai aminci (IS)kebul ne da aka ƙera don yin aiki a cikin yanayi mai haɗari (fashewa) ba tare da haɗarin kunna wuta ba.
Ma'anar Hukuma (IEC 60079-11):Tsarin da ke da aminci a cikin jiki ɗaya ne"wanda duk wani tartsatsin wuta ko tasirin zafi ba zai iya haifar da kunna cakuda kayan da za a iya ƙonewa ko kuma waɗanda za a iya ƙonewa a cikin iska ba a ƙarƙashin sharuɗɗan gwaji da aka tsara."
A cikin Sauƙi:Kebul na IS, idan aka haɗa shi da shinge mai dacewa da ke iyakance makamashi, yana ɗauke da ƙarancin wutar lantarki wanda har ma da gajeren da'ira ko waya da ta karye ba zai iya samar da walƙiya mai zafi da za ta iya kunna iskar gas, tururi, ko ƙura da ke kewaye da shi ba.
Bambancin Mahimmanci:
| Hanyar Kariya | Yadda Yake Aiki | Matsayin Kebul |
| Shaidar Fashewa (Tsohon lokaci) | Katafaren gida mai nauyiya ƙunshifashewar | Kebul yana shiga ta hanyar gland mai hana wuta; kebul ɗin kanta na iya zama na yau da kullun |
| Tsaron Cikin Gida (Tsohon/IS) | Iyakance makamashiyana hanafashewar | Dole ne kebul ya kasance yana da sigogin lantarki masu sarrafawa (ƙarancin Cc/Lc) |
(Tsarin Tsarin Tsaro na Cikin Gida）
A Dingzun Cable,Ana ƙera kebul ɗinmu masu aminci a cikin gida bisa ga buƙatun IEC 60079-11, tare da gina ƙarancin ƙarfin aiki/ƙarancin inductance da kuma rufin shuɗi mai haske don bin ƙa'idodin yanki mai haɗari.
- Ta Yaya Kebul Mai Tsaron Cikin Gida Ke Aiki?
Kebul mai aminci ba ya aiki shi kaɗai. Yana cikin takardar shaidar da aka amince da ita.Tsarin ISwanda ya ƙunshi sassa uku:
Tebur 1: Abubuwa Uku na Tsarin IS
| Bangaren | Wuri | aiki | Misali |
| 1. SHINTSAYE NA IS(Zener ko Galvanic Isolator) | Yankin Tsaro (Ɗakin Kulawa) | Yana iyakance ƙarfin lantarki, wutar lantarki, da cikakken wutar lantarki zuwa matakan aminci (yawanci) | 28V, 93mA, shingen 1.2W |
| 2. Kebul ɗin IS | Yankin Mai Haɗari (Yanki 0/1/2) | Yana watsa makamashi mai iyaka yayin darashin adana ƙarin makamashiwanda za a iya sake shi azaman walƙiya | Kebul mai launin shuɗi mai laushi, mai ƙarancin ƙarfin aiki |
| 3. Kayan aikin IS | Yankin Mai Haɗari | An ƙera shi don aiki a cikin iyakataccen adadin makamashi | Mai watsa matsi, na'urar gano iskar gas, thermocouple |
Ka'idar Iyakance Makamashi:
- Muhimman Bukatu don Kebul Masu Tsaro a Cikin Gida
Ba kowace kebul za a iya amfani da ita a tsarin IS ba. IEC 60079-14 da NFPA 70 sun ƙayyade buƙatun da ake buƙata.
Tebur na 2: Bukatun Kebul Mai Tsaron Kai
| Bukatar | Ƙayyadewa | Tushen Ma'auni | Dalilin da Ya Sa Yana da Muhimmanci |
| Iyakance Makamashi | Dole ne a ware kebul daga da'irorin da ba na IS ba | IEC 60079-14 | Yana hana ƙaura mai haɗari ta makamashi |
| Ƙarfin aiki (Cc) | Ƙarancin ƙarfin rarrabawa (≤150 nF/km na yau da kullun) | IEC 60079-14 | Kebul yana adana makamashi; fitarwar caji da aka adana a matsayin walƙiya lokacin da aka rage shi |
| Inductance (Lc) | Ƙarancin rarrabawar inductance (≤0.8 mH/km) | IEC 60079-14 | Da'irori masu motsawa suna haifar da ƙarar ƙarfin lantarki lokacin da aka buɗe su |
| Kariya | Ana buƙatar hana haɗin EMI | Sashe na 504.30 na NFPA 70 | EMI na iya haifar da makamashi mai iya kunna wuta akan dogayen hanyoyin kebul |
| Kariyar Inji | Murfin da ya yi tauri (PUR, LSZH, ko makamancin haka) | IEC 60092-502 | Yana tsira daga mawuyacin yanayi na masana'antu |
| Ganowa | Murfin waje mai launin shuɗi mai haske (RAL 5015) | IEC 60079-14 (ma'aunin duniya) | Gano gani nan take; yana hana haɗuwa da ba da gangan ba da wutar lantarki ba tare da IS ba |
| Mai jagoranci | Tagulla mai ɗaure (Aji 5/6) | IEEE 1580 | Sassauci da juriyar girgiza |
A Dingzun Cable,Kebul ɗinmu na IS sun cika duk waɗannan buƙatun: ƙarancin Cc/Lc, garkuwar jan ƙarfe mai ƙura, masu sarrafa jan ƙarfe da aka makale, darufin waje mai haske-shuɗi (RAL 5015) na tilasbisa ga IEC 60079-14.
- Lambar Launi Mai Haske-Shuɗi: Me Yasa Wayoyi Kebul Suke Shuɗi
A duk duniya, dole ne a iya gane kebul ɗin da ake amfani da su don da'irori masu aminci a cikin jiki ta hanyarmurfin waje mai haske-shuɗi(RAL 5015) bisa ga IEC 60079-14.
Dalilin da Ya Sa Lambar Launi Yake da Muhimmanci:
| Batun | Sakamakon Yin Watsi da Lambar Launi |
| Haɗin wutar lantarki mara amfani da IS ba bisa ƙa'ida ba | Ma'aikacin fasaha zai iya haɗa da'irar wutar lantarki ta AC 120V zuwa toshewar IS, wanda hakan zai karya shingen tsaro da kuma haifar da haɗarin fashewa. |
| Rikicewar kulawa | Ba tare da gano gani ba, masu amfani da wutar lantarki na iya ɗauka cewa da'irar tana da aminci idan ba ta da aminci |
| Rashin bin ƙa'idoji | Masu binciken kuɗi za su sanya wa da'irori marasa shuɗi na IS alama a matsayin keta doka, wanda zai iya dakatar da ayyukan su |
Bukatun Biyayya:
| Sinadarin | Bukatar |
| Kebul na waje na waje | Shuɗi mai haske (RAL 5015) |
| Alamar kebul | Alamar "Ex-ia" ko "Ex-ib" mai ɗorewa |
| Tashoshi | Tashoshi masu launin shuɗi mai haske ko kuma abin rufe fuska |
| Tsarin magudanar ruwa | Lakabin bututun mai launin shuɗi mai haske ko kuma lakabin "Amintaccen Tsaro a Cikin Gida" |
Gargaɗi:Idan murfin kebul ɗinka baƙi ne, launin toka, ko wani launi banda shuɗi mai haske, toba bisa ƙa'ida badon da'irori na IS bisa ga IEC 60079-14—ba tare da la'akari da aikin wutar lantarki ba.
(Sashen kebul mai aminci a ciki）
A Dingzun Cable,Kebul ɗinmu na IS suna damurfin waje mai launin shuɗi mai haske (RAL 5015) LSZHtare da alamar Ex-ia/Ex-ib mai ɗorewa, wanda ke tabbatar da bin ƙa'idodin yankin da ke da haɗari nan take.
- Sigogi na Wutar Lantarki: Capacitance (Cc) da Inductance (Lc)
Kebul ɗin da kansa yana adana makamashin lantarki ta hanyoyi biyu. Waɗannan kuzarin da aka adana za a iya sakin su azaman walƙiya yayin matsala (gajeren da'ira ko buɗe da'ira). Kebul ɗin IS mai takardar shaida dole ne ya kasance yana daƙasa kuma an rubutaƘimar Cc da Lc.
Tebur na 3: Dalilin da yasa Cc da Lc suke da mahimmanci ga Tsaron Cikin Gida
| Sigogi | Alamar | Abin da Yake Wakilta | Hadarin | Bukatar IS |
| Ƙarfin aiki | Cc (nF/km) | Kebul ɗin yana aiki kamar capacitor, yana adana cajin lantarki tsakanin masu jagoranci da kuma tsakanin mai jagora da mai kariya. | Idan aka rage shi, ana ajiye caji a matsayin walƙiya.Ƙarfin aiki mafi girma = babban walƙiya = haɗarin ƙonewa mafi girma | Ƙasa(≤150 nF/km na yau da kullun) |
| Inductance | Lc (µH/m ko mH/km) | Madaurin kebul yana adana makamashin maganadisu a cikin filin maganadisu da ke kewaye da masu jagoranci | Idan aka buɗe, rugujewar filin maganadisu yana haifar da ƙarar ƙarfin lantarki wanda zai iya haifar da walƙiya | Ƙananan kuma mai sarrafawa(≤0.8 mH/km na yau da kullun) |
| Rabon L/R | L/R (µH/Ω) | Daidaitaccen lokaci na da'irar; yana danganta makamashin maganadisu da aka adana da juriya | Ana amfani da shi don takardar shaidar haƙar kebul (BS 6704) | Dole ne ya dace da ƙayyadaddun katangar |
Manufar Ƙungiyar:
Domin tsarin IS ya ci gaba da kasancewa mai takardar shaida, dukkan sassan uku dole ne su sami sigogin lantarki masu jituwa:
- Fitowar shinge:Lambar (V), Lambar (A),Wannan(mafi girman ƙarfin da aka yarda),The(mafi girman izinin shigarwa)
- Gaskiyar kebul: Babban Shafi(ƙarfin kebul/km),Lc(inductance na kebul/km)
- Kayan aikin filin:Ci (ƙarfin ciki), Li (inductance na ciki)
Tsarin Tabbatarwa:
- Duba Ƙarfin Aiki:(Cc × Tsawon) + Ci ≤ Ca
- Duba Inductance:(Lc × Tsawon) + Li ≤ La
Ma'anar Muhimmanci:Idan masana'antar kebul ba ta bayar baƘimar Cc da Lc, ba za a iya amfani da kebul ɗin a cikin tsarin IS mai takardar shaida ba. Shi ya sa amfani da "kowane kebul mai kariya" a cikin yanki mai haɗari yana da haɗari kuma ba ya bin ƙa'ida.
A Dingzun Cable,muna bayarwaSigogi masu takardar shaida na Lc (µH/m) da Cc (nF/km)tare da kowace jigilar kebul na IS—yana ba ku damar yin lissafin daidai gwargwado da kuma kiyaye bin ƙa'idodin yanki masu haɗari.
- Ex-ia vs. Ex-ib vs. Ex-ic: Matakan Kariya na IS
Ana rarraba da'irori na IS ta hanyar jure wa kurakurai da kuma yankin da aka yarda da shi mai haɗari.
Tebur na 4: Matakan Kariya na IS (IEC 60079-11)
| Ƙimar | Juriyar Laifi | Yankin da Ya Kamata (IEC) | Aikace-aikacen da Aka saba | Bukatar Kebul |
| Daga yanzu | Kurakurai guda biyu masu zaman kansu | Yanki 0(Haɗarin fashewar da ke ci gaba da faruwa) | Masu gano methane, masu nazarin iskar oxygen | Mafi ƙanƙantar iyaka ta Cc/Lc |
| Tsohon ɗaya | Laifi ɗaya ɗaya | Yanki na 1(Haɗarin fashewa mai yiwuwa) | Masu watsa matsi, na'urori masu auna zafin jiki | Matsakaicin iyaka na Cc/Lc |
| Tsohon ic | Babu matsala (aiki na yau da kullun kawai) | Yanki na 2(Ba zai yiwu ba, na ɗan lokaci) | Da'irori marasa ƙarfafawa | Kebul na yau da kullun na IS na iya zama abin karɓa |
Tasiri ga Zaɓin Kebul:
- Daga yanzuyana buƙatar mafi ƙarancin ƙimar Cc da Lc don tabbatar da aminci a ƙarƙashin yanayi biyu na kurakurai
- Tsohon ɗayayana da ƙarancin tsauraran buƙatu amma har yanzu yana buƙatar kebul na IS mai takardar shaida
- Tsohon icyana da buƙatu mafi annashuwa amma har yanzu ana ba da shawarar kebul mai ƙimar IS
A Dingzun Cable,Muna ƙera kebul na IS waɗanda aka ƙididdigeDaga yanzukumaTsohon ɗaya, tare da sigogin Cc/Lc da aka rubuta don tabbatar da mahalli.
- Bukatun Kariya don Kebul Masu Tsaro a Cikin Gida
KowaceSashe na 504.30 na NFPA 70, ana buƙatar kariyar kariya don da'irori masu aminci a cikin jiki don hana haɗin EMI.
Dalilin da yasa garkuwa ta zama dole:
| Tushen EMI | Ƙarfin Fili | Haɗarin da Ke Iya Faruwa |
| Na'urar Sauyin Sauyi (VFD) | 10-50 V/m | Zai iya haifar da ƙarfin lantarki akan kebul mara kariya, yana ƙirƙirar makamashi mai iya kunna wuta |
| Mai watsa rediyo (walkie-talkie) | 5-30 V/m | Ƙarfin mai yawan mita da aka haɗa a kan kebul |
| Kayan aikin walda | 50-100+ V/m | Babban fashewar EMI |
| Babban injin farawa | 20-60 V/m | Filin lantarki na wucin gadi |
Zaɓuɓɓukan Kariya don Kebul ɗin IS:
| Nau'in Garkuwa | Rufewa | Mafi kyawun Aikace-aikacen | Dacewa da IS |
| Garkuwar Foil | 100% | Shigarwa mai kafaffen tsari, EMI mai yawan mita | An yarda da shi don gajerun gudu na IS masu tsayi, masu tsayi |
| Garkuwar Braid | 70-95% | Aikace-aikacen aiki mai ƙarfi/sauƙaƙewa, ƙarancin EMI mai mitoci | An ba da shawarar don hakar ma'adinai, robotics |
| Haɗaɗɗen abu (Foil + Braid) | 100% + kitso | Masana'antu masu tsauri, EMI mai girma | Mafi kyau ga matatun mai, masana'antun sinadarai |
Dokar Manufofin Ginawa Mai Muhimmanci:Dole ne a kafa garkuwar a ƙasamaki ɗaya kawai(yawanci a cikin amintaccen wuri a shingen) don hana madaukai na ƙasa waɗanda zasu iya haifar da makamashi mai haɗari.
A Dingzun Cable,fasalin kebul na IS ɗinmukariya daga kitso mai ƙarfe da aka yi da gwangwani (kariya daga kashi 85%)a matsayin misali, tare da zaɓuɓɓukan haɗaka (foil + kitso) don yanayin EMI mai ƙarfi.
- Bukatun Gina Kebul Mai Tsaron Kai
Tebur na 5: Bayanan Gina Kebul na IS
| Bangaren | Bukatar IS | Me yasa |
| Mai jagoranci | Tagulla mai layi(Aji 5/6, 7-19 zare) | Sassauci don shigarwa; juriya ga girgiza |
| Kayan Jagora | Tagulla mai gwangwani(an ba da shawarar) | Juriyar tsatsa a cikin yanayi mai tsauri |
| Ma'aunin Jagora | 18-24 AWG (na yau da kullun) | Yana daidaita juriya da sassauci |
| Rufewa | PE (Polyethylene)koXLPE | Ƙarancin dielectric constant (ε)ƙasa=2.3) = ƙarancin ƙarfin aiki = tsawon nesa mai aminci |
| Gano Ma'aurata Biyu | Shuɗi/Baƙi (daidaitacce) ko mai lamba | Yana hana kurakuran wayoyi |
| Kariya | Gabaɗaya kifin jan ƙarfe mai rufi(≥85% rufewa) | Toshe shigarwar EMI |
| Magudanar Waya | An haɗa(ƙarfe mai kama da tin) | Yana sauƙaƙa tushen tushe mai maki ɗaya |
| Jakar Ciki | LSZH ko PVC | Yana ƙara kariyar inji |
| Kurmin waje | Shuɗi Mai Haske (RAL 5015), LSZH ko PUR | Ganowar gani ta wajibi bisa ga IEC 60079-14 |
| Yanayin Zafin Jiki | -40°C zuwa +90°C (daidaitacce); -65°C zuwa +200°C (ƙimar FEP) | Yana tsira daga mummunan yanayi na shuke-shuke |
| Matsayin Wuta | IEC 60332-1-2 (mafi ƙaranci); IEC 60332-3-24 (ƙima) | Tsaron wuta |
A Dingzun Cable,Ana ƙera kebul ɗin IS ɗinmu da suRufin PE ko XLPE(ƙananan Cc),kariyar kitso ta tagulla da aka yi da gwangwani(≥85% na ɗaukar hoto), da kumamurfin waje mai launin shuɗi mai haske (RAL 5015) LSZH— ya cika ka'idojin IEC 60079-11 da IEC 60079-14.
- Aikace-aikacen Kebul Mai Tsaron Cikin Gida ta Masana'antu
Wayoyin IS dole ne ga dukkan da'irori masu ƙarancin kuzari da ke shiga yankunan da ke da haɗari.
Tebur na 6: Aikace-aikacen kebul na IS ta Masana'antu
| Masana'antu | Yankin Mai Haɗari | Aikace-aikacen IS na yau da kullun | Matsayin IS da ake buƙata |
| Mai & Gas | Yanki na 1/2 (wuraren ruwa, dandamali, matatun mai) | Masu watsa matsi, mitar kwarara, na'urorin gano iskar gas, RTDs, maɓallan matakin | Tsohon ɗayakoDaga yanzu |
| Sarrafa Sinadarai | Yanki na 1 (reactors, tankunan ajiya) | Na'urori masu auna pH, na'urorin auna zafin jiki, bawuloli na solenoid | Tsohon ɗaya |
| Magunguna | Yanki na 1 (ma'aunin narkewar abinci, ajiyar ethanol) | Kayan aikin sarrafa tsari, na'urori masu auna firikwensin ɗakin tsaftacewa | Tsohon ɗaya |
| Haƙar ma'adinai (Kwal) | Yanki 0/1 (ƙarƙashin ƙasa) | Na'urorin gano methane, fitilun murfi, na'urori masu auna kusanci, tsarin sadarwa | Daga yanzu(Yanki 0) |
| Ruwan shara | Yanki na 1 (ginin mai narke abinci) | Na'urorin auna methane, na'urorin nazarin iskar oxygen, na'urori masu auna matakin | Tsohon ɗaya |
| Fenti / rumfunan feshi | Yanki na 1 | Na'urori masu auna ingancin iska, na'urorin auna zafin jiki, da kuma na'urorin sarrafa shaye-shaye | Tsohon ɗaya |
| Gudanar da Hatsi | Yanki na 20/21 (haɗarin ƙura) | Na'urori masu auna matakin kwandon shara, sa ido kan zafin jiki, da kuma sarrafa na'urar jigilar kaya | Tsohon ɗaya |
- Bukatun Shigarwa don Kebul ɗin IS (IEC 60079-14)
Ko da mafi kyawun kebul na IS zai lalace idan an shigar da shi ba daidai ba.
Tebur na 7: Bukatun Shigar da Kebul na IS
| Dokar | Bukatar | Me yasa |
| Rabuwa | Dole ne a sanya da'irar IS arabuwa ta jikidaga da'irori marasa IS | Yana hana ɓullowar makamashi mai haɗari |
| Nisa tsakanin Rarrabuwa | ≥50mm (inci 2)daga kebul na da ba na IS ba (ko ta hanyar raba ƙarfe da aka gina) | Yana hana haɗakar makamashi mai haɗari ta hanyar inductive/capacitive |
| Gano Tashar | Amfanitashoshi masu launin shuɗi mai haskeko kuma hannun riga | Duba lafiyar gani ga ma'aikatan gyara |
| Tsarin magudanar ruwa | Idan hanyar sadarwa ta raba hanya da wanda ba ta IS ba, dole ne a sanya hanyar sadarwa tashuɗi mai haskeko kuma an yi masa lakabi | Yana hana haɗuwa ba da gangan ba yayin jan |
| Babu Maɓalli | A guji haɗa abubuwa; yi amfani da kebul mai ci gaba | Maƙallan haɗin gwiwa suna ƙirƙirar sigogin lantarki da ba a sani ba (Ci/Li da ba a sani ba) |
| Gina ƙasa | Garkuwar da aka kafa amaki ɗaya kawai(yanki mai aminci) | Yana hana madaukai na ƙasa waɗanda zasu iya haifar da makamashi mai haɗari |
| Takardu | Kula da takardun tsarin IS (sigogin shinge, kebul Cc/Lc, kayan aiki Ci/Li) | Ana buƙata don bin ƙa'idodin doka |
- Tatsuniyoyi Masu Yawa Game da Kebul Masu Tsaron Cikin Gida
| Tatsuniya | Gaskiya |
| "Kowane kebul mai kariya yana da ƙimar IS." | Ƙarya. Kebul ɗin IS suna buƙatar sigogin Cc/Lc masu sarrafawa, murfin shuɗi, da sigogin abubuwan da aka rubuta. Kebul ɗin da aka kare na yau da kullun ba su da ƙimar Cc/Lc masu inganci. |
| "Shingayen yana yin duk aikin tsaro—kebul ba shi da mahimmanci." | Karya ne. Kebul ɗin yana adana makamashi (capacitance/inductance). Kebul mai ƙarfin iko mai yawa zai iya karya ƙimar aminci na shingen ta hanyar wuce Ca. |
| "Blue cable kawai fifikon talla ne." | Karya. Shuɗi (RAL 5015) shineAn ba da umarni ta IEC 60079-14don gano da'irar IS. Kebul mara shuɗi ba ya bin ƙa'ida. |
| "Zan iya haɗa kebul na IS tare da masu haɗin da aka saba amfani da su." | Ƙarya. Maƙallan haɗin suna ƙirƙirar sigogin lantarki da ba a sani ba (Ci, Li) waɗanda ke ɓata lissafin mahaɗan. Yi amfani da akwatunan mahaɗin IS da aka tabbatar. |
| "Kwamfutar IS ta yi yawa ga Yankin 2." | Bukatun IS sun bambanta dangane da yanki, amma har yanzu ana ba da shawarar kebul mai ƙimar IS don daidaito da bin ƙa'ida. Ex-ic yana samuwa ga Zone 2. |
| "Duk kebul ɗin shuɗi iri ɗaya ne." | Karya. Shuɗi nelambar launi ta aminci, ba alamar aiki ba. Tabbatar da takardar shaidar IS, ƙimar Cc/Lc, da kuma iya bin diddigin masana'anta. |
(Shigar da kebul na Dingzun Cable a cikin aminci)
Game da Dingzun Cable: Abokin hulɗarka na Injiniyan Kebul Mai Tsaro a Cikin Gida
Tare daShekaru 20+ na ƙwarewar masana'antu ta musamman,Kebul na Dingzunabokin tarayya ne amintacce ga ayyukan makamashi, sinadarai, haƙar ma'adinai, da magunguna na duniya waɗanda ke buƙatar takaddun shaidaKebul ɗin da ke da aminci a ciki (IS)don kayan aikin yanki masu haɗari. Muna haɗa ƙwarewar yanki mai zurfi mai haɗari damatsananci keɓancewadon isar da kebul waɗanda suka dace da takamaiman ƙayyadaddun bayanai na IS da sigogin mahalli.
Ƙarfin Kebul ɗinmu Mai Tsaron Kai:
| Ƙarfi | Bayanin Dingzun |
| Bin ƙa'ida | IEC 60079-11, IEC 60079-14, NFPA 70, IEEE 1580 |
| Matakan Kariya | Daga yanzu(Yanki 0),Tsohon ɗaya(Yanki na 1) |
| Launin Kurfi | Shuɗi Mai Haske (RAL 5015)- wajibi ne bisa ga IEC 60079-14 |
| Kayan Rufi | LSZH (amincin gobara, ƙarancin hayaƙi), PUR (juriyar mai/ƙazanta), PVC (na gabaɗaya) |
| Rufewa | PE ko XLPE— ƙarancin dielectric constant = ƙarancin capacitance (≤150 nF/km) |
| Kariya | Gabaɗaya kifin jan ƙarfe mai rufi(Kashi ≥85% na murfin) + waya mai magudanar ruwa |
| Mai jagoranci | Tagulla mai ƙugiya (Aji 5/6, 18-24 AWG) |
| Sigogi na Lantarki | Takaddun Lc Mai Tabbatarwa (µH/m) da Cc (nF/km)an bayar don lissafin mahalli |
| Yanayin Zafin Jiki | -40°C zuwa +90°C (daidaitacce); -65°C zuwa +200°C (ƙimar FEP) |
| Matsayin Wuta | IEC 60332-1-2 (daidaitacce); IEC 60332-3-24 (Zaɓuɓɓukan LSZH) |
| Takaddun shaida | ISO 9001: 2015, CE, RoHS, REACH (UL yana samuwa idan an buƙata) |
| Gwaji | Gwajin lantarki 100%a kan kowane reel (juriyar jagora, juriyar rufi, ƙarfin lantarki mai yawa) |
(Gwajin sigar kebul na IS a cikin Dingzun Cable)
Me yasa Kebul na Dingzun don Shigar da Yankinku Mai Haɗari:
- Musamman keɓancewa— Adadin mai jagoranci (1 zuwa 100+), ma'auni, madauri, yawan kariyar kariya, kayan murfin - duk an tsara su ne don amfani da IS ɗinku.
- An ƙera shi don aminci— Ƙaramin ginin Cc/Lc tare da sigogin abubuwan da aka rubuta don dacewa da shinge
- Ƙungiyar injiniya ta ƙwararru— Tallafi ga lissafin sigogin mahalli (daidaita Ca/La) don tabbatar da takardar shaidar tsarin IS
- Sadarwa kai tsaye ta ƙwararru- Ra'ayoyin gaggawa, cikakkun takaddun bayanai na fasaha tare da ƙimar Cc/Lc da aka tabbatar, da jigilar kaya ta duniya
- Cikakken takardu- Rahotannin gwaji, takaddun shaida na bin ƙa'idodi, sanarwar RoHS/REACH, da kuma bin diddigin kowane jigilar kaya
Kuna buƙatar kebul mai inganci don kayan aikin yankinku mai haɗari?
[Tuntuɓi ƙungiyar fasaha tamu a yau tare da sigogin shingenku don shawarwari da ƙiyasin musamman].