Tlhaloso ea Maemo a EN 50288-7: Seo Bareki ba Cable ea Lisebelisoa ba Lokelang ho se Tseba
- Karabo e Tobileng: EN 50288-7 e Hlalosa Tshebetso, Eseng Kaho Feela
Batho ba lula ba botsa:"Litlhoko tse tloaelehileng tsa thapo ea lisebelisoa ke life?"
Karabo e bonolo:EN 50288-7 ke tekanyetso ea Europe e hlalosanglitlhoko tsa motlakase, tsa mechine, tsa ho lieha ha malakabe le tsa mochesobakeng sa disebediswa le dikhoele tsa taolo tse sebediswang ditsamaisong tsa taolo ya tshebetso ya indasteri.
| Seo EN 50288-7 e se koahelang | Seo e sa se koahetseng |
| Liparamente tsa motlakase (impedance, capacitance, attenuation, resistance) | Lisebelisoa tse khethehileng tsa ho thibela mocheso (li bitsa ts'ebetso, eseng diresepe) |
| Katleho ea tšireletso (litlhoko tsa tlhahlobo) | Mekhoa ea ho kenya (sheba EN 60079-14 bakeng sa libaka tse kotsi) |
| Thepa ea mechini (radius ea kobeha, ho tsitlella, tšusumetso) | Lipalo tsa ho tsamaisa thapo kapa ho tlatsa terei |
| Ho thibela malakabe (IEC 60332-1, haeba ho hlokahala, IEC 60332-3) | Thepa ea mokhanni (e nkoang e le koporo, empa tekanyo ha ea tiea) |
| Tekanyetso ea mocheso | Tekanyo ea motlakase (e koahetsoeng ke litekanyetso tse ling) |
| Ho latela melao ea ho tšoaea CE (tekanyetso e lumellanang) | Setifikeiti sa sebaka se kotsi (Ex) (sheba IEC 60079-11/14) |
Hobaneng EN 50288-7 e le ea Bohlokoa ho Bareki:
- Letšoao la CE– EN 50288-7 ke tekanyetso e lumellanang tlasa Tataiso ea Low Voltage (LVD) bakeng sa 'maraka oa Europe.
- Litlhaloso tsa projeke– Likhamphani tse ngata tsa boenjiniere (EPCs) li hloka ho latela melao ea EN 50288-7 bakeng sa lifeme tsa indasteri (li-refineries, lik'hemik'hale, motlakase, meriana).
- Tiisetso ea ts'ebetso– Ho fapana le “thapo ya disebediswa” e tlwaelehileng, EN 50288-7 e fana ka diparamitha tsa motlakase tse lekantsweng tseo o ka di netefatsang.
Ho Dingzun Cable,Likhoele tsohle tsa rona tsa lisebelisoa li entsoe ho latela litlhoko tsa EN 50288-7 - ka litlaleho tsa liteko tse ngotsoeng bakeng sa impedance, capacitance, attenuation, le retardant ea malakabe. Re tšehetsa litlhoko tsa hau tsa ho tšoaea CE le ho latela projeke.
- Liparamente tsa Motlakase tsa Motheo: Impedance, Capacitance, Attenuation
EN 50288-7 e totobatsa diparamithara tse tharo tsa bohlokwa tsa motlakase tse amang ka ho toba botshepehi ba letshwao.
Tafole ea 1: EN 50288-7 – Litlhaloso tsa Motlakase tse Tlamang
| Paramethara | Letšoao | Tlhokahalo ea EN 50288-7 | Lebaka Leo e Leng la Bohlokoa |
| Impedance ea Tšobotsi | KA₀ | 100Ω, 120Ω, kapa 150Ω ±5Ω(mamello e tiileng) | Ho se tshwane ho baka diphoso tsa pontsho ya letshwao le data. 120Ω bakeng sa RS485; 100-150Ω bakeng sa analoge |
| Bokgoni (ho se leka-lekane, para-ho-para) | Ka | ≤200 pF/100m | Bokgoni bo phahameng ba ho fetisa matla bo sotha matshwao a analog mme bo fokotsa bolelele ba thapo |
| Ho fokotseha ha matla (ho 1 MHz) | a | ≤20 dB/km(tlhoko e tloaelehileng) | Ho fokotsa haholo = sebaka se sekhutšoanyane ka ho fetisisa. Ke habohlokoa bakeng sa puisano ea dijithale. |
| Khanyetso ea mokhanni | R | Ho itshetlehile ka gauge (mohlala, ≤73 Ω/km bakeng sa 24 AWG) | E ama ho theoha ha motlakase ho li-loop tsa 4-20mA. Tekanyo e teteaneng = li-loop tse telele |
| Khanyetso ea ho thibela ho ruruha | LE | ≥5,000 MΩ·km(hangata ≥10,000 MΩ·km) | IR e tlase e baka ho dutla ha lets'oao le ho bua ka tsela e fapaneng |
| Ho kenella ha motlakase | L | Ka tloaelo ≤0.8 mH/km (e hlalosoang ke foromo ea impedance) | E ama ts'ebetso ea maqhubu a phahameng le nako ea ho phahama ha lets'oao |
Mamello ea ±5Ω ea Impedance e Bolela'ng bakeng sa Sistimi ea Hao:
| Mamello ea Impedance | Koefficient ea ho bonahatsa | Boleng ba Letšoao | Ho Latela Melao ea EN 50288-7 |
| ±5Ω (±4.2%) |
| E ntle haholo - tshebetso e felletseng | √ E lumellana le melao (premium) |
| ±10Ω (±8.3%) | ~4% ponahatso | E amoheleha bakeng sa ho matha nako e khutšoanyane | X Ha e latele melao |
| ±15Ω (±12.5%) | ~6% ponahatso | Karolo e ka thoko – liphoso tse ka bang teng | X Ha e latele melao |
| Ha e hlalosoe | Tse sa Tsejoeng | Kotsi - e ke ke ea fana ka tiiso | X Ha ea lokela |
(thapo ea lisebelisoa bakeng sa RS485: 120Ω±5Ω)
Ho Dingzun Cable,Likhoele tsa rona tse lumellanang le EN 50288-7 lia atleha120Ω ±5Ω(≤4.2% mamello) e netefalitsoeng ke teko ea motlakase ea 100% - ho netefatsa botšepehi ba lets'oao bakeng sa RS485 e hole le li-loop tsa analog.
- Litlhoko tsa Mekaniki le Tikoloho
EN 50288-7 e boetse e totobatsa ho tiea ha mechini le ho tšoaneleha ha tikoloho.
Tafole ea 2: EN 50288-7 – Litlhaloso tsa Mekaniki le Tikoloho
| Paramethara | Tlhokahalo ea EN 50288-7 | Mokhoa o Tloaelehileng oa Teko | Lebaka Leo e Leng la Bohlokoa |
| Bonyane radius ea kobeho (ho kenngoa ho tsitsitseng) | 7.5 × bophara ba kantle | EN 60811-506 | E thibela mokhathala oa mokhanni le tšenyo ea ho thibela mocheso nakong ea ho kenya |
| Radius e nyane ea ho kobeha (ho kobeha) | Bophara ba kantle ba 12-15× (bo fapana ho ya ka moralo) | EN 60811-506 | Bohlokoa bakeng sa litsela tsa cable, liroboto, mechine e tsamaisang |
| Tekanyo ea mocheso (e tsitsitseng) | -30°C ho isa ho +70°C (bonyane) – boikgethelo bo phahameng | EN 60811-501 | E tlameha ho phela maemong a tikoloho ea limela |
| Tekanyo ea mocheso (ho tenyetseha) | -5°C ho isa ho +50°C (bonyane) – boikgethelo bo phahameng | EN 60811-501 | Ho tenyetseha ha serame bakeng sa libaka tsa kantle kapa tsa sehatsetsing |
| Ho lieha ha lelakabe (thapo e le 'ngoe) | IEC 60332-1-2(tlamo) | EN 60332-1-2 | E thibela ho ata ha mollo ka lebaka la phoso e le 'ngoe ea thapo |
| Ho thibela malakabe (likhoele tse kopantseng) | Boikhethelo – IEC 60332-3-24/25 (Karolwana C/B/A) | EN 60332-3-24/25 | E hlokahala bakeng sa diterei tsa cable, lithanele, lits'ebetso tse nang le bongata bo phahameng |
| Ho hanyetsa oli | Boikhethelo – e boletsoeng ke moreki (mohlala, EN 60811-404) | EN 60811-404 | Bakeng sa mechini, likoloi, kapa lifeme tsa lik'hemik'hale |
| Khanyetso ea UV | Khetho - e boletsoeng bakeng sa tšebeliso ea kantle | ISO 4892-2 | E thibela baki ho petsoha ha letsatsi le chaba |
Dikgetho tsa Ntlafatso ya Tekanyo ya Mocheso (ka hodimo ho bonyane ba EN 50288-7):
| Ntlafatso ea Lintho tse Hlokahalang | Boemo ba Thempereichara | Kopo |
| PVC (e tloaelehileng) | -30°C ho isa ho +70°C | Libaka tse akaretsang tsa ka tlung, tse omileng |
| XLPE | -40°C ho isa ho +90°C | Libaka tse nang le mocheso o phahameng, tse mongobo |
| LSZH | -30°C ho isa ho +90°C | Polokeho ea mollo, libaka tse koetsoeng |
| baki ea PUR | -40°C ho isa ho +90°C | Oli, ho hohlana, kantle |
| Silicone | -60°C ho isa ho +180°C | Ho tenyetseha ho hoholo, serame/mocheso o feteletseng |
| FEP/PFA | -65°C ho isa ho +200/260°C | Mocheso o feteletseng, limela tsa lik'hemik'hale |
Ho Dingzun Cable,Re etsa likhoele tse lumellanang le EN 50288-7 tse nang le litekanyetso tse ntlafalitsoeng tsa mocheso, ho lieha ha malakabe ho ntlafetseng (IEC 60332-3 Cat C/B/A), le thepa ea baki e ikhethileng (LSZH, PUR, FEP) ho lumellana le tikoloho ea hau ea 'nete - eseng feela maemo a tlase.
(Lenaneo la ho latela melao la moreki la EN 50288-7)
- Litlhoko tsa Tšireletso: Tshebetso ea Tlhahlobo
EN 50288-7 ha e laele mofuta o itseng oa thebe (foil khahlanong le lohiloeng), empa e hloka katleho ea tšireletso e tlalehiloeng.
Tafole ea 3: EN 50288-7 – Litlhaloso tsa Tšireletso le Tlhahlobo
| Paramethara | Tlhokahalo ea EN 50288-7 | Ho kenya tshebetsong ho tlwaelehileng | Nako ea ho Sebelisa |
| Tlhahlobo ea para ka 'ngoe (ha ho hlokahale) | Ha se tlamo, empa haeba e le teng, e tlameha ho fihlela meeli ea phetisetso ea phetisetso | Foil (sekoahelo sa 100%) + terata ea drain | Matšoao a bohlokoa a analog(thermocouple, 4-20mA, RTD) ho thibela ho buisana ka tsela e fapaneng |
| Tlhahlobo ka kakaretso (e khothaletsoa bakeng sa lipara tse ngata) | Phetiso impedance le coupling attenuation boletsweng | Ho loha (70-95%)kapamotsoako (foil + braid) | Boholo ba mehaho ea indasteri - e fokotsa EMI ea kantle |
| Katleho ea tlhahlobo (ha e hlalositsoe ka lipalo maemong a motheo) | E tlameha ho phatlalatsoa ke moetsi | Ka tloaelo >70 dB (e kopaneng >90 dB) | Libaka tse nang le EMI e phahameng (li-VFD, lienjene, li-welder, lifeme tsa motlakase) |
| Terata ea ho ntsha metsi | Ho hlokahala bakeng sa lithebe tsa foil (ho nolofalletsa ho felisoa) | Koporo e kentsweng ka makotikoting, tekanyo e lekanang le ea mokhanni | E nolofatsa ho thella ha mobu; e bohlokoa bakeng sa lithebe tsa foil |
Tataiso ea Tšireletso ea EN 50288-7 ka Kopo:
| Tikoloho ea Kopo | Tšireletso e Khothaletsoang | Hobaneng |
| EMI e tlase (kamore ea taolo, ofisi) | Foil ka kakaretso(e nyane) | E bolokang tjhelete, e lekane |
| EMI e itekanetseng (fektheri e akaretsang) | Ho loha ka kakaretso (kahare ho ≥85%) | Tšireletso e tšoarellang, e ntle ea maqhubu a tlase |
| EMI e Phahameng (li-VFD, limothara, lithapo tsa motlakase) | Motsoako (foil + braid) | Tšireletso ea mahlaseli a pharaletseng (>90 dB) |
| Matshwao a bohlokwa a analog (thapo e tshwanang le ya dijithale) | Foil ka 'ngoe ka para + loho ka kakaretso | E thibela puisano e fapaneng pakeng tsa ba babeli |
| Lisebelisoa tse tenyetsehang / tse matla (lenane la cable) | Ho loha ka kakaretso feela(e tenyetsehang ho feta foil) | Braid e mamella ho kobeha khafetsa |
Ho Dingzun Cable,Likhoele tsohle tsa rona tsa lisebelisoa tsa EN 50288-7 tse nang le lipara tse ngata li kenyelletsatlhahlobo ea foil ka bonngoe para ka 'ngoehammoho lekhoele ea koporo e entsoeng ka makotikoti ka kakaretso (≥85%)e le maemo a tloaelehileng – ho fana ka thibelo e phahameng ea ho buisana le ho sireletsa EMI. Bakeng sa EMI e feteletseng, re fana ka lithebe tse kopaneng (foil + braid) ka kakaretso tse nang le katleho e tlalehiloeng ea >90 dB.
- Lethathamo la ho Latela Melao la EN 50288-7 bakeng sa Bareki
Sebelisa lenane lena la tlhahlobo ha o reka dikheibole tsa disebediswa ho netefatsa hore EN 50288-7 e latela melao.
Tafole ea 4: Lethathamo la ho Latela Melao ea Bareki la EN 50288-7
| Tlhokahalo | Seo U Lokelang ho se Netefatsa | Litokomane tse Tloaelehileng | Ho Latela Melao ea Cable ea Dingzun |
| Impedance e ikhethang | 100Ω, 120Ω, kapa 150Ω ±5Ω | Tlaleho ea teko (impedance vs makhetlo) | √ 120Ω ±5Ω (mamello ea ≤4.2%) |
| Ho se leka-lekane ha bokhoni | ≤200 pF/100m | Tlaleho ea teko | √ ≤150 pF/100m |
| Ho fokotseha ha maikutlo | ≤20 dB/km @ 1 MHz | Tlaleho ea teko | √ ≤18 dB/km @ 1 MHz |
| Khanyetso ea mokhanni | Ka tekanyo (mohlala, ≤73 Ω/km bakeng sa 24 AWG) | Tlaleho ea teko | √ E netefalitsoe ka tekanyo |
| Khanyetso ea ho thibela ho ruruha | ≥5,000 MΩ·km | Tlaleho ea teko | √ ≥10,000 MΩ·km |
| Ho lieha ha lelakabe (le le leng) | IEC 60332-1-2 | Setifikeiti sa teko | √ E lumellana le melao |
| Ho lieha ha malakabe (ho tlamiloe) | IEC 60332-3-24/25 (Karolwana C/B/A) – haeba ho boletswe | Setifikeiti sa teko | √ Boikhethelo (Kate C, B, A ea fumaneha) |
| Tekanyetso ea mocheso | Jwalo ka ha ho boletswe (bonyane -30°C ho isa ho +70°C) | Leqephe la lintlha | √ -40°C ho isa ho +90°C (e ntlafalitsoe) |
| Radiyo e kobehileng | 7.5× OD (e tsitsitseng) | Leqephe la lintlha | √ E lumellana le melao |
| Letšoao la CE | E phatlalalitsoe ke moetsi | Phatlalatso ea Tumellano | √ E fanoe |
| EN 50288-7 e phatlalalitsoe | Moetsi o bolela hore o latela melao ea leqephe la data | Leqephe la lintlha, khoteshene | √ E boletsoe ka ho hlaka |
Lifolakha tse Khubelu (Matšoao a ho se Latele Melao):
| Folakha e Khubelu | Hobaneng e le Bothata |
| Mofani a ke ke a fana ka litlaleho tsa tlhahlobo ea impedance kapa capacitance | Ha ke khone ho netefatsa ho latela melao ea EN 50288-7 |
| Mamello ea impedance e boletsoe e le ± 10Ω kapa ± 15% | Ha e fihlelle tlhoko ea ± 5Ω; ho ka etsahala hore ho be le likhakanyo |
| Ha ho na boleng ba ho se leka-lekane ha capacitance bo fanoeng | Ha e khone ho bala sebaka se sireletsehileng bakeng sa lipotoloho tsa IS |
| “E latela EN 50288-7” empa ha ho na bopaki ba liteko | Litlaleho tsa teko ea tlhoko tse sa tšehetsoeng ke bopaki |
| Teko ea lelakabe la cable e le 'ngoe feela, empa ho kenngoa ho kopantsoe | E kanna ea se ke ea fihlela khoutu ea polokeho ea mollo bakeng sa literei tsa cable |
Ho Dingzun Cable,re fana kalitokomane tse felletseng tsa teko ea EN 50288-7ka thomello e 'ngoe le e 'ngoe - ho kenyeletsoa le impedance, capacitance, attenuation, resistance, le litlaleho tsa liteko tsa malakabe. Maqephe a rona a data a bolela ka ho hlaka hore na EN 50288-7 e latela melao. Ha ho na liqoso ntle le bopaki.
- EN 50288-7 khahlano le Maemo a mang a Cable ea Lisebelisoa
Hangata bareki ba kopana le maemo a mangata. Ho utloisisa liphapang ho thusa ho qoba pherekano.
Tafole ea 5: EN 50288-7 khahlanong le Maemo a Mang a Lisebelisoa
| E tloaelehileng | Sebaka | Tsepamisa maikutlo | Liphapang tsa Bohlokoa ho tsoa ho EN 50288-7 |
| EN 50288-7 | Yuropa (CENELEC) | Motlakase + oa mechini + oa taolo ea indasteri | Motheo - e hokahantsoe bakeng sa ho tšoaea CE |
| IEC 60092-502 | Machaba | Lisebelisoa tsa metsing le tsa mose ho maoatle | E eketsa litlhoko tse ikhethileng tsa leoatleng: ho fafatsa letsoai, ho thothomela, ho hanyetsa metsi |
| BS5308 | UK (lefa, e ntse e sebelisoa) | Lisebelisoa tsa oli le khase | E eketsa ho tiea ha mechini (sehlomo sa SWA), hangata e hloka sekhetla se kotsi (se putsoa) |
| IEEE 1580 | Machaba | Likhoele tsa metsing le tsa mose ho maoatle | E ts'oanang le IEC 60092-502; Tlhokomelo ea Amerika Leboea |
| UL 13 / UL 2250 | amerika e leboea | Likhoele tsa potoloho tse lekanyelitsoeng ke motlakase, lisebelisoa | Tatellano e fapaneng ea liteko tsa lelakabe (VW-1, CMR, CMP); impedance ha e hlalosoe kamehla |
| NEC / CEC | amerika e leboea | Likhoutu tsa ho kenya (eseng maemo a sehlahisoa) | Litšupiso Maemo a UL bakeng sa kaho ea lithapo |
Ke Tekanyetso Efe eo U Lokelang ho e Hlalosa?
| Sebaka sa Morero / Indasteri | Maemo a Motheo | Ea bobeli / E eketsehileng |
| Yuropa (indasteri e akaretsang) | EN 50288-7 | Ho hlokahala letšoao la CE |
| Oli le Khase tsa UK | BS5308(hangata ka litlhoko tsa motlakase tsa EN 50288-7) | Sebaka se kotsi (ATEX/IECEx) |
| Lebōpong la leoatle / Sekepe sa metsing | IEC 60092-502kapaIEEE 1580 | EN 50288-7 e ka 'na ea sebelisoa bakeng sa lisebelisoa tsa motlakase |
| Amerika Leboea (indasteri e akaretsang) | UL 13 / UL 2250 | E kanna ea kopa EN 50288-7 bakeng sa liparamitha tsa motlakase |
| Machaba (projeke ea EPC - mohlala, Shell, Kakaretso) | EN 50288-7kapaIEC 60092-502(ho latela lekala) | Hangata e kopantsoe le litlhoko tse ikhethileng tsa projeke |
Ho Dingzun Cable,Re etsa likhoele tsa lisebelisoa ho latela maemo a EN 50288-7, BS5308, le IEC 60092-502 – ka litokomane tsohle tsa liteko. Sehlopha sa rona sa boenjiniere se u thusa ho toloka hore na projeke ea hau e hloka maemo afe.
- Letšoao la CE: Hobaneng EN 50288-7 e le ea Bohlokoa bakeng sa 'Maraka oa Europe
EN 50288-7 kemaemo a lumellanangtlas'a EU Low Voltage Directive (LVD) 2014/35/EU.
Seo ho Kopanngoa ho se Bolelang:
- Ho latela melao ea EN 50288-7 ho fana kakhopolo-taba ea ho lumellanaka LVD.
- Lihlahisoa li ka mamellaLetšoao la CEbakeng sa polokeho ea motlakase.
- E hlokahala bakeng sa ho beha likhoele tsa lisebelisoa 'marakeng oa Europe.
Litlhoko tsa ho Tšoaea CE bakeng sa Likhoele tsa Lisebelisoa:
| Tlhokahalo | Kamoo EN 50288-7 e Thusang Kateng |
| Polokeho ea motlakase (ho kenya mocheso, ho mamella motlakase) | EN 50288-7 e kenyelletsa liteko tsa ho hanyetsa ho kenella ha mocheso le dielectric |
| Ho lieha ha lelakabe | Melao ea EN 50288-7 IEC 60332-1-2 (thapo e le 'ngoe) |
| Phatlalatso ea moetsi | Ho latela melao ya EN 50288-7 ho tshehetsa Faele ya Tekheniki |
| Ho tsebiswa ka ho kenella ha mmele (hangata ha ho hlokehe bakeng sa dikheibole ntle le kaho e ikgethang) | Ha ho hlokahale – ho ipolela ho latela EN 50288-7 |
Bakeng sa Bareki:
- Haeba o fana ka thepa Europe kapa o sebedisa dikarolo tse tswang Europe,hlalosa EN 50288-7ho netefatsa hore CE e latela melao.
- KopaPhatlalatso ea Tumellanole litlaleho tsa liteko tse tsoang ho mofani oa hau oa cable.
Ho Dingzun Cable,Likhoele tsohle tsa rona tse lumellanang le EN 50288-7 li kenyelletsa letšoao la CE le Phatlalatso ea Tumellano - e tšehetsang ho latela melao ea hau bakeng sa merero ea Europe.
Mabapi le Cable ea Dingzun: Molekane oa Hao oa Cable ea Lisebelisoa tsa EN 50288-7
KaLilemo tse 20+ tsa boiphihlelo bo khethehileng ba tlhahiso,Cable ea Dingzunke molekane ea tšepahalang bakeng sa lik'hamphani tsa boenjiniere tsa lefats'e, li-EPC, le basebelisi ba indasteri ba hlokangLikhoele tsa lisebelisoa tse lumellanang le EN 50288-7ka litokomane tse felletseng tsa liteko. Re kopanya boiphihlelo bo tebileng ba maemo leho iketsetsa lintho ka mokhoa o feteletsengho fana ka dikheibole tse fihlelang tlhaloso ya projeke ya hao – eseng bonyane feela.
(Thapo ea lisebelisoa ea Dingzun Cable EN 50288-7)
Bokgoni ba rona ba Cable ea Lisebelisoa tsa EN 50288-7:
| Bokhoni | Tlhaloso ea Dingzun |
| Ho latela melao ea motlakase | 120Ω ±5Ω (mamello ea ≤4.2%), ≤150 pF/100m (ho se leka-lekane ha capacitance), ≤18 dB/km ho fokotseha ha motlakase |
| Dikgetho tsa ho thibela | 100Ω, 120Ω, 150Ω - kaofela ±5Ω |
| Palo ea para | Lipara tse 1 ho isa ho tse 100+ |
| Tekanyo ea mokhanni | 18 AWG ho isa ho 24 AWG |
| Ho kenya mocheso | PE (bokgoni bo tlase, maemo a tlwaelehileng), XLPE (tempereichara e ntlafaditsweng), PVC |
| Tšireletso | Foil e le 'ngoe (ka para) + khoele ea koporo e entsoeng ka makotikoti ka kakaretso (≥85%) - e tloaelehileng; khetho ea motsoako |
| Ho lieha ha lelakabe | IEC 60332-1-2 (e tloaelehileng); IEC 60332-3-24/25 Cat C/B/A (ha ho hlokahale) |
| Lisebelisoa tsa baki | PVC, LSZH, PUR, (ha e na halogen, ha e hanele oli, e tsitsitse UV ha ho hlokahala) |
| Tekanyetso ea mocheso | -40°C ho isa ho +90°C (e tloaelehileng, e ntlafalitsoe ho feta bonyane ba EN 50288-7) |
| Mekaniki | Radius e kobehileng 7.5× OD (e tsitsitseng), matla a ho thapolla ho ya ka EN 60811 |
| Letšoao la CE | E fanoe ka Phatlalatso ea ho Latela Melao |
| Litokomane tsa teko | Litlaleho tse felletseng tsa liteko(impedance, capacitance, attenuation, resistance, lakabe) ka thomello e 'ngoe le e 'ngoe |
| Lisetifikeiti | ISO 9001:2015, CE, RoHS, REACH |
Hobaneng Cable ea Dingzun Bakeng sa Litlhoko tsa Hao tsa Cable ea Lisebelisoa tsa EN 50288-7:
- Ho latela melao ea 'nete– Hase feela “e etselitsoeng ho fihlela” – re fana ka litlaleho tsa liteko tse netefalitsoeng
- Litokomane tse felletseng tsa motlakase– Litlaleho tsa ho se sebetse hantle, bokhoni ba ho sebetsa, ho fokotseha ha matla, ho hanyetsa li kenyelelitsoe
- Tshebetso e ntlafetseng– Mamello e matla (120Ω ± 5Ω), bokgoni bo tlase (≤150 pF/100m) ho feta kamoo ho hlokahalang ka teng.
- Ho iketsetsa lintho ka mokhoa o feteletseng– Lipara, gauge, thebe, baki, lihlomo – li etselitsoe ka botlalo
- Sehlopha sa boenjiniere ba litsebi– Puisano ya mahala mabapi le tlhaloso ya EN 50288-7 le ditlhoko tsa projeke
- Puisano e tobileng ea litsebi– Litheko tse potlakileng, maqephe a data a tekheniki, thomello ea lefats'e